| |
fence specs | wooden > 1 | 2 |3 | 4 | 5
|
 |
|
Chestnut Hill Staggered
Heights: 3, 4', 5', 6'
Components: 1-1/2" x 1-1/2" square cedar spindles, alternating pattern with 1-5/8" spacing
Dressing: Middle and top fascia 1" x 4", routed edges front and back. Bottom fascia 1" x 6"—same look front and bakc on based model.
Construction: Square mortised on rear side of fence with 2" x 4" top and bottom—routed.
Optional Spacing: 1"—1-5/8"—2"—3"
|
Beacon Hill
Heights: 3', 4', 5', 6'
Components: 1-1/2" x 1-1/2" square cedar spindles, alternating pattern with 1-5/8" spacing
Dressing: Middle and top fascias 1" x 4", routed edges front and back–same look front and back on base model.
Construction: Square mortised on rear side of fence with 2" x 4" top and bottom–routed.
Optional Spacing: 1"—1-5/8"—2"—3"
|
 |
|
Chestnut Hill Salloped
Heights: 3', 4', 5', 6'
Components: 1-1/2" x 1-1/2" square cedar spindles, alternating pattern with 1-5/8" spacing. Scalloped is approximately 4" in depth.
Dressing: Middle fascias 1" x 4", routed edges front and back. Bottom fascia 1" x 6" construction.
Construction: Square mortise on rear side of fence with 2" x 4" top and bottom routed.
|
Chestnut Hill
Heights: 3', 4', 5', 6'
Components: 1-1/2" x 1-1/2" square cedar spindles, alternating pattern with 1-5/8" spacing
Dressing: Top fascias 1" x 4", routed edges front and back. Bottom fascia 1" x 6" construction.
Construction: Square mortised on rear side of fence with 2" x 4" top and bottom–routed.
|
 |
|
Bunker Hill
Heights: 3', 4', 5', 6'
Components: 1-1/2" x 1-1/2" square cedar spindles with 1-5/8" spacing.
Dressing: Middle fascias 1" x 4", routed edges front and back. Bottom fascia 1" x 6".
Construction: First four spindles, left and right, graduate downward 6" before leveling across. Square mortise on rear side of fence with 2" x 4" top and bottom routed.
|
Greenwich Lattice
(also available in Square Lattice)
Heights: 3', 4', 5', 6'
Components: Lattice 2" opening diagonal as shown, 3" thick finished.
Dressing: All fascias 1" x 4", top cap 1" x 4" board with choice of eased edge or square edge—also available in square openings.
Optional: Square lattice.
Optional: 1" openings in both diagonal or square
|
 |
|
Heritage Convex
Heights: 3', 4', 5', 6'
Components: Lattice 2" opening diagonal as shown, 3" thick finished, descending arch 4" from top.
Dressing: All fascias 1" x 4", top cap 1" x 4" board with choice of eased edge or square edge. Available in both square and diagonal openings.
Optional: 1" spacing and square lattice.
|
Contemporary Spaced Dressed
Heights: 3', 4', 5', 6'
Components: 1" x 4" cedar boards with flat tops.
Dressing: Top fascia and cap 1" x 4" routed bottom fascia 1" x 6" routed.
Construction: Boards mounted on 2" x 4" cedar backer rail
with 15/8" spacing.
Optional Spacing: 1" 2" or 3"
|
|
|
